Tips For Troubleshooting Your Home Alarm System In Killeen
System glitches and false alarms can be frustrating, and even worse, could prevent your home’s security from doing its job effectively. Luckily, most troubles, from false alarms to dead batteries, are easy to correct. Explore our suggestions for troubleshooting your home alarm system in Killeen. We’ll help keep your family members safeguarded and your system operating properly.
Test Your Home Security System In Killeen
One of the best ways to troubleshoot your property’s security is to test it! The latest systems have a test mode so you don’t accidentally trigger an emergency response. Once in test mode, do the following:
- Turn on your system as you normally would when you leave.
- Open a window or door that has a contact sensor, or try to set off another device. Close the door or window once you’re done so it doesn’t prompt the alarm when you reactivate the system.
- Permit the alarm to sound for 60 seconds to make sure a transmission is dispatched to the security company and an entry is made in the alarm activity log.
- Proceed to test sensors as needed
- Inspect the systems’s activity log to validate proper function.
No need to worry, monitoring specialists can see that your alarm system is being tested. Just make sure to switch off test mode when complete. It’s wise to test monthly or whenever you change your home’s phone or internet service.
Inspect The Position And Condition Of Motion Sensors
Although an crucial part of your alarm system, motion detectors are notorious for false alarms. Do your part to prevent them with some basic troubleshooting.
- Perform a visual check. Are there things that could shift within the path of the sensor, like drapery caught in a breeze?
- Is the sensor dirty? Cobwebs, dirt, and grime can lead to issues. Check to confirm the sensor is clean.
- Does the motion detector come with pet immunity you can activate? Some sensors can be set to disregard pets weighing as much as 100 pounds.
- When was the battery last replaced? Low batteries may impact performance or lead to false alarms.
- Is a heat source impairing the sensor? Excess heat from sunlight or a fireplace can trigger an alarm.
Keep Batteries Ready And Watch Out For Low Battery Warnings
One of the great advantages of modern home security systems is that they’ll alert you when batteries are dying. If your system is equipped with a app or control panel, you’ll typically see notifications there. Depending on your system, you may notice an occasional beep when batteries are getting low.
Motion detectors, smoke detectors, contact sensors, and other wireless devices have batteries that will have to be replaced every so often. It’s best to keep batteries around and set a replacement schedule. Some systems also have a backup battery for the main control panel. This backup battery helps keep your system running if your power goes out and should charge back up once power is restored. If it doesn’t, you will have to replace it.
Troubleshooting Is Effortless With ADT Home Security In Killeen
As the foremost name in home security, ADT builds systems that offer unsurpassed functionality and convenience. Getting into test mode is easy through the ADT+ app or MyADT.com, and you’ll always receive notifications when a battery is running low. Contact Secure24 Alarm Systems, an authorized ADT dealer, to learn more and design a system perfect for your Killeen home. Place a call to (254) 236-2429 or complete our form today!