ADT® Authorized Dealer Serving Killeen & Surrounding Areas
close up of a lady adjusting the security panel
March 01, 2022

How To Reset Your Security System In Killeen

One perk of getting your security system hooked up by trained experts is that you seldom need to concern yourself with it. Even so, there will likely be a few instances where you must reset your alarms in Killeen. When using a smart command panel, a reset normally requires just a few minor button tap when you’ve experienced common events like false alarms and battery changes.

Read The Manual Before Trying to Reset Your Alarm Panel

A word to the wise before you start resetting your Killeen home security system, check your manual ahead of time. You don't want to undermine your system because you hit the wrong button. Also, the process could be different if you upgraded from a numerical keypad to a digital command hub. Keep in mind that if you can't reset your system, don't be reluctant to reach out to your trusted security specialists.

Resetting Your Killeen Home Security System After A False Alarm

Usually, a false alarm occurs because of the accidental tripping of a sensor. You are able to utilize the ADT Command touchscreen or access your ADT smartphone app and hit the shield icon and enter your unique passcode to switch off the alarms in these situations. You might be contacted by your 24-hour monitoring specialists, but simply inform them that you had a false alarm.

Tips To Reset Your Alarm Following A Power Outage In Killeen

When you lose power because of high winds or other factors, you might begin hearing a steady beep from your control panel. This signifies that the alarm is using the secondary power source. To reset your unit and silence the steady beeps, you should take steps to disarm and rearm your security.

However, if your power outage lasts for a longer period of time, you might need a complete reset of your system. Pay careful attention to the instructions in your user’s handbook -- usually by putting in your code and hitting the off button twice -- and you should be back to normal. You may keep hearing chirping caused by the secondary power source, as it might not stop until the battery charges entirely. Contact your home security agent if you keep having problems with your ADT system a day after power is restored.

When You Need To Reset Your Home Security System After Switching Out A Battery

There will be infrequent times when you must switch out a battery within one of your security devices. To do this, you should switch your alarm system to "Test Mode" so you avoid triggering an accidental alarm. When the you replace the old battery, move the system from "Test Mode" and restore normal operations. If the system is unable to recognize the device or the battery indicator is still on, you may have to perform a whole system reset.

Tips to Reset Your Killeen Security System When Adding Or Removing A User

Adding and deleting personal codes can be done on your ADT Command interface and the ADT Control mobile app. You should never have to perform a resetting of your system following the addition or deletion of users. With that being said, if you find yourself moving to a new house already equipped with an ADT security system, you should contact your security specialists at (254) 236-2429 to establish a new contract. The installer will come out and replace equipment, set up additional components (if necessary), and do a factory reset.

A Well-Designed Security System Is Only A Call Away

Attempting to reset a home security system in Killeen will likely be difficult if it isn’t equipped with clear equipment and instructions. If you’re ready to acquire your intuitive alarm system, call (254) 236-2429 or send in the form below. Our specialists are ready to help customize the perfect security system for your property.